Before Using The Machine; Part Names And Functions; Exterior - Sharp MX-7001 User Manual

1

BEFORE USING THE MACHINE

This chapter provides basic information about the machine. Please read this chapter before using the machine.

PART NAMES AND FUNCTIONS

EXTERIOR

When a finisher is
installed
(1) Finisher / saddle stitch finisher*
This can be used to staple output. The saddle stitch
finisher can automatically staple output at the center line
and fold the pages to create a pamphlet.
☞
FINISHER / SADDLE STITCH FINISHER
(2) Punch module*
This is used to punch holes in output.
☞
PUNCH MODULE
(3) Inserter*
Paper loaded in the inserter can be inserted into output
from the machine as covers and inserts.
☞
INSERTER (page 58)
(4) Automatic document feeder
This automatically feeds and scans multiple originals. Both
sides of 2-sided originals can be automatically scanned.
☞
PLACING THE ORIGINAL
* Peripheral device.
(1)
(page 49)
(page 57)
(page 44)
(2) (3) (4) (5) (6)
(5) Front cover (upper)
Open this to replace a toner cartridge or clear a paper
misfeed from the paper pass unit.
☞
REPLACING THE TONER CARTRIDGES
(6) Front cover (lower)
Open this to switch the main power on and off.
☞
TURNING THE POWER ON AND OFF
☞
5. MAINTENANCE
(7) Operation panel
This is used to select functions and enter the number of
copies.
☞
OPERATION PANEL
(8) Right Tray
Output can be delivered to this tray.
(9) Output tray (center tray)
Output is delivered to this tray.
5
(7) (8) (9)
When a finisher /
saddle stitch finisher
is not installed
(page 65)
(page 10)
(page 74)
(page 16)