Erasing Peripheral Shadows (Erase) - Sharp MX-7001 User Manual

ERASING PERIPHERAL SHADOWS (Erase)

The erase function is used to erase shadows around the edges of copies that occur when copying thick originals or
books.
When a thick book is copied
Shadows appear here
Erase modes
Edge Erase
Place the original.
1
Place the original face up in the document feeder tray, or face down on the document glass.
Select the special modes.
(1) Touch the [Special Modes] key.
2
(2) Touch the [Erase] key.
☞
Special modes menu (1st screen)
(1)
Special Modes
Erase
3
Edge
Center
Erase
Erase
(page 44)
(2)
Cancel
Edge+Center
Edge Center
Erase
1/2 1/2
(0~1)
inch
Not using the erase
function
Shadows appear on the
copy.
Center Erase
Select the erase settings.
(3)
(1) Touch the desired erase mode.
OK
Select one of the three positions.
OK
(2) Set the erasure width with
0" to 1" (0 mm to 20 mm) can be entered.
(3) Touch the [OK] key.
(0~1)
inch
You will return to the base screen of copy mode.
49
Using the erase
function
Shadows do not appear on
the copy.
Edge + Center Erase
.