Paper Table - Sharp MX-7001 User Manual

Caution
When placing paper, do not insert your fingers into the openings in the paper table.
4
Do not insert spare paper or other objects into openings inside the tray.
5
If you loaded a different type of paper than was loaded previously, change the paper type setting as explained in
"Paper Tray Settings" in the System Settings Guide.
Do not place heavy objects on the tray or press down on the tray.
System Settings: Paper Tray Settings
Change these settings if you load a different type of paper in the tray.
Place the paper in the center of the
Indicator line

paper table.

The paper should be loaded with the print side face down.
When a certain amount of paper is placed on the paper table,
the paper table will automatically descend slightly and then
stop. Continue loading paper in this way.
The paper stack must not be higher than the indicator line.
A maximum of 3000 sheets of paper can be loaded in the tray.
Gently push the paper tray into the
machine.
Push the tray firmly all the way into the machine. After the tray
is pushed in, the paper table will rise. While the paper tray
rises, the operation button indicator will blink. After the paper
tray finishes rising, the indicator will light solidly.
35