Selecting A Special Mode - Sharp MX-B401 Quick Start Manual

SELECTING A SPECIAL MODE

The procedure for selecting settings for "Adding margins (Margin Shift)" is
explained below as an example. Although the specific settings for each
special mode vary, the general procedure is the same.
The side to be scanned must be face up!
Exposure
Auto
Original
Copy Ratio
100%
Special Modes
(2)
Margin Shift
Job
Transparency
Build
Inserts
Card Shot
Sharpness
Special Modes
Margin Shift
Down
Right Left
Up
50
(1)
Special Modes
2-Sided Copy
Plain
8½x11
Output
8½x11
1.
5½x8½
2.
File
8½x14
3.
8½x11
4.
Quick File
Paper Select
Auto
8½x11
Plain
OK
Erase Pamphlet Copy
1
2
2in1
Stamp Image Edit
File Quick File
(4)
OK
Cancel OK
Side 1 Side 2
3/4 3/4
(0~1) (0~1)
inch inch
(3)
1
Place the originals.
When using the document glass,
place the original with the side to be
scanned face down.
2
Select settings in the touch
panel.
(1) Touch the [Special Modes]
key.
(2) Touch the [Margin Shift]
key.
Settings to shift the margin 3/4"
down will be selected.
(3) Select 3/4" for the front
side and 3/4" for the
reverse side using the
keys.
The margin shift position is initially
set to "Up".
To set the margin shift position to
"Right", "Left", or "Down", touch
the corresponding key.
(4) Touch the [OK] key.