Selecting A Special Mode - Sharp MX-B381 Quick Start Manual

SELECTING A SPECIAL MODE

The procedure for selecting a special mode for fax is explained below.
The settings that must be selected vary for each special mode, however, the
general procedure is the same. The procedure for erasing shadows at the edges
of the image when sending a fax is explained below as an example.
The side to be scanned must be face up!
Scan Internet Fax
Address Book
Original
Scan:
Direct TX Exposure Auto
Sub Address
Resolution Standard
Special Modes
Address Review
(1)
File
Quick File
Fax Memory:100%
Fax/Special Modes
Program
Erase
(2)
Job
Card Shot
Build
File Quick File
Transaction
Report
Fax/Special Modes
Erase
Edge
Erase
Side Erase
18
Fax USB Mem. Scan PC Scan
Auto
A4 Send:
Auto Reception
OK
Timer
1
Slow Scan
2
Mode
Business
Card Scan
Own Name
Select
OK
(4)
Cancel OK
Edge
15
(0~20)
mm
(3)
1
Place the originals.
When using the document glass,
place the original with the side to be
scanned face down.
2
Select settings in the touch
panel.
(1) Touch the [Special Modes] key.
(2) Touch the [Erase] key.
The erase settings will be
configured to erase a width of
15 mm around the edges of the
original.
(3) Set the erasure width to
15 mm with the
The erase area is set to "Edge
Erase" by default.
A particular side can be erased by
touching the [Side Erase] key and
selecting settings for that side.
(4) Touch the [OK] key.
3
Enter the fax number of the
receiving fax machine and
press the [START] key.
keys.
Cancel scanning