Selecting A Special Mode - Sharp MX-4100N Quick Start Manual

SELECTING A SPECIAL MODE

The procedure for selecting settings for "Adding margins (Margin Shift)" is explained below as an example.
Although the specific settings for each special mode vary, the general procedure is the same.
The side to be scanned must be face up!
Color Mode
Full Color
8½x11
Exposure 1.
8½x11R
2.
Auto
8½x14
3.
4. 11x17
Original
Copy Ratio Paper Select
100%
Auto Auto
8½x11
8½x11
Plain
Special Modes
Margin Shift Erase
(2)
Job
Pamphlet Copy
Build
Transparency
Covers/Inserts
Inserts
Book Copy Tab Copy
Special Modes
Margin Shift
Right Left Down Side 1
3/4
1
2
Special Modes
(1)
2-Sided Copy
Plain
8½x11
Output
File
Quick File
Preview
OK
Dual Page
Copy
1
Tandem
2
Copy
Multi Shot
Card Shot
OK
(4)
Cancel OK
Side 2
3/4
(0~1) (0~1)
inch inch
(3)
3
Place the originals.
When using the document glass, place the original with the
side to be scanned face down.
Select settings in the touch panel.
(1) Touch the [Special Modes] key.
(2) Touch the [Margin Shift] key.
Shifting the left margin by 3/4" will be explained as an
example.
(3) Select 3/4" for the front side and 3/4" for the
reverse side using the
The margin shift position is initially set to "Right".
To change the position to "Left" or "Down", touch the
corresponding key.
(4) Touch the [OK] key.
Set the number of copies and then press the
[COLOR START] key or the [BLACK & WHITE
START] key.
Correct sets
keys.
Cancel scanning Cancel copying
39