Step 6: Install Duct Bracket - GE ZV750SY Installation Instructions Manual

Step 6
• Install the 2 small screws into the sides of the
• Temporarily install a length of 6" duct
Install Duct
Bracket
• Position the upper duct bracket behind the
• Mark the 4 screw locations.
• Remove the bracket and temporary duct
• Drill 1/8" pilot holes in marked locations.
• If pilot holes did not enter studs, enlarge the
• Secure the bracket to the ceiling and wall
duct bracket. Remove the screws. This will
insure ease of final installation.
between the hood outlet and the ductwork at
the ceiling.
duct and against the wall and ceiling.
section.
holes to 3/8" and install molly bolt anchors.
with wood screws and/or molly bolts.
Installation
36" Vent Hood
9