To Change Air Flow Direction - Sharp CV-10NH Installation And Operation Manual

TO CHANGE AIR FLOW DIRECTION

UP / DOWN AIR FLOW DIRECTION
LEFT / RIGHT AIR FLOW DIRECTION
CAUTION
Never attempt to adjust the horizontal louvers manually.
• Manual adjustment of the horizontal louvers can cause the unit to malfunction when the remote
control is used for adjustment.
• When the horizontal louvers are positioned at the lowest position in the COOL or DEHUMIDIFI-
CATION mode for an extended period of time, condensation may result.
Do not adjust the vertical louvers to the extreme left or right in the COOL mode with the
fan speed set to "QUIET (
Condensation may form on the louvers.
1
Press the LOUVERS button on the re-
mote control.
• The horizontal louvers will swing continu-
ously.
1
2
Press the LOUVERS button again when
the horizontal louvers are at the desired
2
position.
• The horizontal louvers will stop moving.
• The adjusted position will be memorized and
the same position will be set automatically
when operated the next time.
NOTE
• During VENTILATION mode, UP/DOWN air fl ow
direction cannot be changed.
Horizontal louvers
Hold the vertical louver as shown in the dia-
gram and adjust the air fl ow direction.
Vertical louvers
)" for an extended period of time.
E-21