Richell 94920 Instruction Manual page 2

How to Assemble
Before assembly, determine if you want to have the Door Panel on the left or right side
組 立 方 法
and the width of the crate.
Use a Philips-head screwdriver for assembly.
1
Attach Panels
1-1. Determine the position of the Door Panel.
※Depending on the position of the Door Panel, the position of each Panel varies.
(A) Left-hand Door Installation
Tighten the bolts at 16 points as shown with black
and white arrows.
※White arrows = Long Bolts, Black arrows = Short Bolts
How to tighten Long/Short Bolts
(B) Right-hand Door Installation
Tighten the bolts at 16 points as shown with black
and white arrows.
※White arrows = Long Bolts, Black arrows = Short Bolts
How to tighten Long/Short Bolts
Flat Washers
Short Bolt
Lock on the Side Panel B faces outward.
※Tighten the bolts halfway first, then thoroughly tighten all the bolts after assembly.
Long Bolt
Flat Washers
Spring
Washers
Short Bolt
Long Bolt
Spring
Washers
Positions of each Panel and Bolt Holes
(View from top of this product)
※Please check direction of the Bolt Holes and sizes.
Bolt Hole
Back Panel B
Back Panel A
Front Panel B
Front Panel A
Lock on the Side Panel B faces outward.
Positions of each Panel and Bolt Holes
(View from top of this product)
※Please check direction of the Bolt Holes and sizes.
Bolt Hole
Large
Back Panel A
Bolt Hole
Small
Front Panel A
2
Bolt Hole
Large
Bolt Hole
Small
Back Panel B Bolt Hole
Front Panel B