Operation; Main Unit Operation - Sharp FP-P60CX Operation Manual

OPERATION

MAIN UNIT OPERATION

CLEAN FILTER Indicator Light
Power ON/OFF Button
1
• Used to start operation (short beep) and stop operation (long beep)
• Plasmacluster Indicator Light and Fan Speed Indicator Light turn on/off.
• Unless unplug the power cord, is unplugged the operation starts in the previous
mode the unit was operated in.
MODE Selection Button
2
• The operation mode can be switched, and the Indicator Light will turn on.
AUTO operation
The fan speed is automatically switched
(HIGH*, MEDIUM, SILENT) depending
on the amount of impurities in the air.
The sensors detect the impurities for ef-
ficient air purification.
QUICK CLEAN operation
The unit will operate at HIGH* fan speed
for 15 minutes, then will operate at Auto
operation.
The operation mode is effective when
quick removal of impurities in the air is
desired.
POLLEN mode operation
The unit will operate at HIGH* fan speed
for 10 minutes, then will alternate
between NORMAL and HIGH for 20
minutes.
10 minutes: HIGH fan speed
20 minutes: MEDIUM fan speed
20 minutes: HIGH fan speed
NIGHT MODE Indicator Light
CLEAN SIGN Light
Plasmacluster Indicator Light
E-12
Plasmacluster
NIGHT MODE Operation
The fan speed is automatically
switched between MEDIUM and
SILENT, depending on the
amount of impurities in the air.
The Plasmacluster Indicator
Light and Clean-Sign Light will
turn off.
MAX operation
The unit will operate at a fan
speed of MAX.
MEDIUM operation
The unit will operate at a fan
speed of MEDIUM.
SILENT operation
The unit will operate quietly
using minimal air intake.
* HIGH fan speed is an intermediate
speed between MEDIUM and MAX.
Main Unit Controls
• AUTO
• QUICK CLEAN
• POLLEN
• SILENT
• MEDIUM
• MAX
• NIGHT MODE
MODE Selection Button
Power ON/OFF Button
1
2