Axis Q19 series Installation Manual page 2

Legal Considerations
Video and audio surveillance can be prohibited by laws that
vary from country to country. Check the laws in your local
region before using this product for surveillance purposes.
This product includes one (1) H.264 decoder license. To
purchase further licenses, contact your reseller.
Trademark Acknowledgments
Apple, Boa, Bonjour, Ethernet, Internet Explorer, Linux,
Microsoft, Mozilla, Real, SMPTE, QuickTime, UNIX, Windows,
Windows Vista and WWW are registered trademarks of the
respective holders. Java and all Java-based trademarks and
logos are trademarks or registered trademarks of Oracle
and/or its affiliates. UPnP
UPnP TM Implementers Corporation.
Electromagnetic Compatibility (EMC)
This equipment has been designed and tested to fulfill
applicable standards for:
• Radio frequency emission when installed according to the
instructions and used in its intended environment.
• Immunity to electrical and electromagnetic phenomena
when installed according to the instructions and used in
its intended environment.
USA -
AXIS Q1910/-E/Q1921/-E: This equipment has been
tested using shielded cables (STP) and found to comply with
the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more
of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
AXIS Q1922/-E: This equipment has been tested using a
shielded network cable and found to comply with the limits
for a Class A digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable
protection against harmful interference when the
equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a
residential area is likely to cause harmful interference in
which case the user will be required to correct the
interference at his own expense.
Canada -
AXIS Q1910/-E/Q1921/-E: This Class B digital
apparatus complies with Canadian ICES-003.
AXIS Q1922/-E: This Class A digital apparatus complies with
Canadian ICES-003
Europe -
AXIS Q1910/-E/Q1921/-E: This digital
equipment fulfills the requirements for RF emission
according to the Class B limit of EN 55022.
AXIS Q1922/-E: This digital equipment fulfills the
requirements for RF emission according to the Class A limit
of EN 55022. Caution! This is a Class A product. In a
is a certification mark of the
TM
domestic environment this product may cause RF
interference, in which case the user may be required to take
adequate measures.
This product fulfills the requirements for emissions and
immunity according to EN 50121-4 railway applications.
This product fulfills the requirements for immunity
according to EN 61000-6-1 residential, commercial and
light-industry environments. This product fulfills the
requirements for immunity according to EN 61000-6-2
industrial environments. This product fulfills the
requirements for immunity according to EN 55024 office
and commercial environments.
Australia -
AXIS Q1910/-E/Q1921/-E: This digital
equipment fulfills the requirements for RF emission
according to the Class B limit of AS/NZS CISPR 22.
AXIS Q1922/-E: This digital equipment fulfills the
requirements for RF emission according to the Class A limit
of AS/NZS CISPR 22. Caution! This is a class A product. In a
domestic environment this product may cause RF
interference, in which case the user may be required to take
adequate measures.
Korea - AXIS Q1910/-E/Q1921/-E:
AXIS Q1922/-E:
Japan - AXIS Q1910/-E/Q1921/-E:
スB 情報技術装置です。この装置は、家庭環境で使用
することを目 的としていますが、この装置がラジオ
やテレビジョン受信機に近接して使用されると、 受
信障害を引き起こすことがあります。 取扱説明書に
従って正しい取り扱いをして下さい。
AXIS Q1922/-E:
この装置は、クラスA 情報技術装置
です。この装置を家庭環境で使用すると電波妨害 を
引き起こすことがあります。この場合には使用者が適
切な対策を講ずるよう要求され ることがあります。
Safety
The power supply used with this product shall fulfill the
requirements for Safety Extra Low Voltage and Limited
Power Source according to EN/IEC/UL 60950-1.
AXIS Q1910/Q1921/Q1922: This product complies to EN/IEC
60950-1, Safety of Information Technology Equipment.
The POE (Ethernet) cable should not be routed to an outside
power source, unless protectively earthed.
AXIS Q1910-E/Q1921-E/Q1922-E: This product complies to
EN/IEC 60950-1 and EN/IEC 60950-22, Safety of
Information Technology Equipment.
Equipment Modifications
This equipment must be installed and used in strict
accordance with the instructions given in the user
documentation. This equipment contains no
user-serviceable components. Unauthorized equipment
changes or modifications will invalidate all applicable
regulatory certifications and approvals.
Continued on page 105.
この装置は、クラ