Axis P1468-LE Repainting Instructions
Hide thumbs
Also See for P1468-LE:
- User manual (63 pages) ,
- Installation manual (32 pages) ,
- Repainting instructions (8 pages)
Table of Contents
Advertisement
Quick Links
AXIS P14 and AXIS Q19 Camera Series
AXIS P1455-LE Network Camera
AXIS P1455-LE 29 mm Network Camera
AXIS P1465-LE-3 License Plate Verifier Kit
AXIS P1467-LE Bullet Camera
AXIS P1468-LE Bullet Camera
AXIS Q1951-E Thermal Camera
AXIS Q1952-E Thermal Camera
AXIS Q1961-TE Thermal Camera
Repainting instructions
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Axis P1468-LE
Summary of Contents for Axis P1468-LE
- Page 1 AXIS P14 and AXIS Q19 Camera Series AXIS P1455-LE Network Camera AXIS P1455-LE 29 mm Network Camera AXIS P1465-LE-3 License Plate Verifier Kit AXIS P1467-LE Bullet Camera AXIS P1468-LE Bullet Camera AXIS Q1951-E Thermal Camera AXIS Q1952-E Thermal Camera AXIS Q1961-TE Thermal Camera...
- Page 2 Risks with repainting There are several risks when disassembling or assembling an Axis product. There is always a certain yield loss during assembly. Training of operators and the use of correct tools mediates some of the problems but they can never be fully avoided. Some of the risks include: ESD Damage - Always handle the product in an ESD safe environment.
- Page 3 AXIS P14 and AXIS Q19 Camera Series Repaint the product Repaint the product Preparations • If applicable, disassemble the device according to the instructions in this document. • Clean all parts that will be repainted thoroughly to remove grease, dust, or oil.
- Page 4 AXIS P14 and AXIS Q19 Camera Series Repaint the product Disassembly Back plate Bottom base cover Camera unit Holder Weathershield 1. Remove the bottom base cover. 2. Remove the lid from the bottom base cover. 3. Remove the weathershield. 4. Remove the holder from the weathershield.
- Page 5 AXIS P14 and AXIS Q19 Camera Series Repaint the product Lock screw Screw Arm cover 10 Pin 5. Remove the lock screw, the screws and the arm cover. 6. Remove the pin.
- Page 6 AXIS P14 and AXIS Q19 Camera Series Repaint the product Masking 1. Make sure all necessary preparations of the camera unit has been made. See Preparations on page 3 . 2. Mask all screw and screwholes. 3. Mask the entire top surface of the bottom base cover.
- Page 7 AXIS P14 and AXIS Q19 Camera Series Repaint the product Reassembly 1. Place the pin in the recess in the arm. 2. Attach the arm cover, the four screws and the lock screw. Do not tighten the lock screw. Tighten the four screws with 1 N m (0.7 lb ft) tightening torque.
- Page 8 Repainting instructions Ver. M8.1 AXIS P14 and AXIS Q19 Camera Series Date: July 2023 © Axis Communications AB, 2021 - 2023 Part no. T10168119...
Need help?
Do you have a question about the P1468-LE and is the answer not in the manual?
Questions and answers