Table of Contents
Advertisement
Port Forwarding
This will allow you to open a single port or a range of ports.
Enter a name for the rule or select an application from the drop-down
Name:
menu. Select an application and click
Enter the IP address of the computer on your local network that
IP Address:
you want to allow the incoming service to. If your computer is
receiving an IP address automatically from the router (DHCP),
you computer will be listed in the"Computer Name" drop-down
menu. Select your computer and click <<.
Enter the TCP and/or UDP port or ports that you want to open.
TCP/UDP:
You can enter a single port or a range of ports. Separate ports
with a common.
Example: 24,1009,3000-4000
Inbound Filter: Select Allow All (most common) or a created Inbound filter.
You
may create your own inbound filters in the
Filter page.
The schedule of time when the Virtual Server Rule wil be enabled.
Schedule:
The schedule may be set to Always, which wil al ow the particular
service to always be enabled. You can create your own times in
the Tools > Schedules section.
to populate the fields.
<<
Advanced > Inbound
Advertisement
Table of Contents
