Manual Configuration; Dynamic (Cable) - Gemtek WRTB-283N User Manual

My Internet Select Dynamic IP (DHCP) to obtain IP Address information
automatically
Connection: from your ISP. Select this option if your ISP does not give you any IP
numbers
to use. This option is commonly used for cable modem services such
as
Comcast and Cox.
Host Name: The Host Name is optional but may be required by some ISPs. Leave blank
if you are not sure.
DNS Servers: Enter the Primary and secondary DNS server IP addresses assigned by your
ISP. These addresses are usually obtained automatically from your ISP.
Leave blank if you did not specifically receive these from your ISP.
MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specific ISP. 1500 is the default
MTU.
The default MAC Address is set to the Internet port's physical interface MAC address on the Broadband Router. It is
MAC Address:
not recommended
that you change the default MAC address unless required by your ISP. You can use the Clone Your PC's MAC Address button to
replace the Internet port's MAC address with the MAC address of your Ethernet card.

Manual Configuration

Dynamic (Cable)