Static Ipv6 (Stateful) - Gemtek WRTB-283N User Manual

Select Static IPv6 from the drop-down menu.
My IPv6 Connection:
Enter the address settings supplied by your
WAN IPv6 Address Settings:
Internet
provider (ISP).
Enter the LAN (local) IPv6 address for the router.
LAN IPv6 Address:
LAN Link-Local Address: Displays the Router's LAN Link-Local Address.
Enable Autoconfiguration: Check to enable the Autoconfiguration feature.
Autoconfiguration Type: Select Stateful (DHCPv6).
Enter the start IPv6 Address for the DHCPv6
IPv6 Address Range Start:
range for
your local computers.
Enter the end IPv6 Address for the DHCPv6 range for
IPv6 Address Range End:
your local computers.
Enter the IPv6 Address Lifetime (in minutes).
IPv6 Address Lifetime:

Static IPv6 (Stateful)