Network Settings - Gemtek WRTB-283N User Manual

Table of Contents

Advertisement

Network Settings

This section will allow you to change the local network settings of the router and to configure the DHCP settings.
Enter the IP address of the router. The default IP address is
IP Address:
192.168.1.1.
If you change the IP address, once you click Apply, you will need
to enter the new IP address in your browser to get back into the
configuration utility.
Enter the Subnet Mask. The default subnet mask is 255.255.255.0.
Subnet Mask:

Advertisement

Table of Contents
loading

Table of Contents