Autoconfiguration (Stateful) - Gemtek WRTB-283N User Manual

Select Autoconfiguration(Stateless/DHCPv6) from
My IPv6 Connection:
the drop-down menu.
Select either Obtain DNS server address automatically
IPv6 DNS Settings:
or Use the following DNS Address.
Primary/Secondary DNS Enter the primary and secondary DNS server
addresses.
Address:
Enter the LAN (local) IPv6 address for the router.
LAN IPv6 Address:
LAN Link-Local Address: Displays the Router's LAN Link-Local Address.
Enable Autoconfiguration: Check to enable the Autoconfiguration feature.
Autoconfiguration Type: Select Stateful (DHCPv6).
Enter the start IPv6 Address for the DHCPv6 range for
IPv6 Address Range Start:
your local computers.
Enter the end IPv6 Address for the DHCPv6 range for
IPv6 Address Range End:
your local computers.
Enter the IPv6 Address Lifetime (in minutes).
IPv6 Address Lifetime:

Autoconfiguration (Stateful)