Static (Assigned By Isp) - Gemtek WRTB-283N User Manual

Select Static IP Address if all the Internet port's IP information is provided to you by your ISP. You will need to enter in the IP address,
subnet mask,
gateway address, and DNS address(es) provided to you by your ISP. Each IP address entered in the fields must be in the appropriate IP form, which
are four octets separated by a dot (x.x.x.x). The Router will not accept the IP address if it is not in this format.
Enter the IP address assigned by your ISP.
IP Address:
Enter the Subnet Mask assigned by your ISP.
Subnet Mask:
Default Gateway: Enter the Gateway assigned by your ISP.
DNS Servers: The DNS server information wil be supplied by your ISP (Internet Service
Provider.)
Maximum Transmission Unit - you may need to change the MTU for
MTU:
optimal
performance with your specific ISP. 1500 is the default MTU.
The default MAC Address is set to the Internet port's physical interface
MAC Address:
MAC
address on the Broadband Router. It is not recommended that you
change the
default MAC address unless required by your ISP. You can use the Clone Your PC's
button to replace the Internet port's MAC address with the MAC
MAC Address
address of your Ethernet card.

Static (assigned by ISP)