Pppoe (Stateless) - Gemtek WRTB-283N User Manual

Select PPPoE from the drop-down
My IPv6 Connection:
menu.
Enter the PPPoE account settings supplied by your Internet provider (ISP).
PPPoE:
Select Static if your ISP assigned you the IP address, subnet mask, gateway,
Address Mode:
and DNS server addresses. In most cases, select Dynamic.
Enter the IP address (Static PPPoE only).
IP Address:
Enter your PPPoE user name.
User Name:
Enter your PPPoE password and then retype the password in the next box.
Password:
Enter the ISP Service Name (optional).
Service Name:
Select either Always-on, On-Demand, or Manual.
Reconnection Mode:
Enter a maximum idle time during which the Internet connection
Maximum Idle Time:
is
maintained during inactivity. To disable this feature, enable Auto-reconnect.
MTU:
Maximum Transmission Unit - you may need to change the MTU for optimal
performance with your specific ISP. 1492 is the default MTU.
IPv6 DNS Settings:
Select either Obtain DNS server address automatically or Use the
following DNS Address.
Primary/Secondary DNS
Enter the primary and secondary DNS server addresses.
Address:
LAN IPv6 Address:
Enter the LAN (local) IPv6 address for the router.
LAN Link-Local Address:
Displays the Router's LAN Link-Local Address.

PPPoE (Stateless)