Gree GVH24AK-K3DNC8A Service Manual page 19

1
ON/OFF button
Press this button can turn on or turn off the air conditioner. After turning on the air conditioner, indoor unit will give out a sound.
2
SAVE button
Under cooling mode, press this button to start up or turn off energy-saving function.When energy-saving function is started up,
"SE" will be shown on remote controller, and air conditioner will adjust the set temperature automatically according to
ex-factory setting to reach to the best energy-saving effect. Press this button again to exit energy-saving function.
3
FAN button
Pressing this button can set fan speed circularly as: auto (AUTO), low(
Note:
Under AUTO speed, air conditioner will select proper fan speed automatically according to ex-factory setting.
It's Low fan speed under Dry mode.
Turbo cannot be set in FAN mode.
4
MODE button
Press this button to select your required operation mode.
AUTO
When selecting auto mode, air conditioner will operate automatically according to the sensed temperature. Set temperature
can't be adjusted and will not be displayed as well. Press "FAN" button can adjust fan speed. Press "
fan blowing angle.
After selecting cool mode, air conditioner will operate under cool mode. Cool indicator "
or " "
button to adjust set temperature. Press "
fan blowing angle.
When selecting dry mode, the air conditioner operates at low speed under dry mode. Dry indicator "
Under dry mode, fan speed can't be adjusted. Press "
When selecting fan mode, the air conditioner will only blow fan, no cooling and no heating. Fan indicator "
unit is ON.
Press "FAN" button to adjust fan speed. Press"
When selecting heating mode, the air conditioner operates under heat mode. Heat indicator "
Press "▲" or " " button to adjust set temperature. Press " FAN" button to adjust fan speed. Press "
adjust fan blowing angle. (Cooling only unit won't receive heating mode signal. If setting heat mode with remote controller,
press ON/OFF button can't start up the unit).
Note:
For preventing cold air, after starting up heating mode, indoor unit will delay 1~5 minutes to blow air (actual delay time is
depend on indoorambient temperature).
Set temperature range from remote controller: 16~30 (61-86°F); Fan speed: auto, low speed, medium speed, high speed,
turbo speed.
5
▲/ button
Press "▲" or " " button once increase or decrease set temperature 1 (°F). Holding "▲" or "
set temperature on remote controller will change quickly . On releasing button after setting is finished, temperature indicator
on indoor unit will change accordingly. (Temperature can't be adjusted under
When setting TIMER ON, TIMER OFF, press "▲" or "
6
Cool button
Press this button, unit will operate in cool mode.
16
7
Heat button
Auto
COOL DRY FAN
FAN" button to adjust fan speed. Press "
" / "
), medium (
HEAT
" / " " button to adjust fan blowing angle.
" button to adjust fan blowing angle.
auto mode)
" button to adjust time. (Refer to TIMER button for details)
Service Manual
), high( ), turbo( ).
" / " " button can adjust
" on indoor unit is ON. Press "▲"
" / " " button to adjust
" on indoor unit is ON.
" on indoor
" on indoor unit is ON.
" / " " button to
" button, 2s later,
Technical Information