Tractor Pre-Operation Inspection/Service; Loader Pre-Operation Inspection And Service - RHINO LOADER 4211 Operator's Manual

6.1 Tractor Pre-Operation Inspection/Service

Refer to the tractor operator's manual to ensure a
complete pre-operation inspection and scheduled
service is performed
manufacturers recommendations.
are some of the items that require daily service and
inspection:
• Tire condition/air pressure
• Wheel lug bolts
• Steering linkage
• PTO shield
• SMV sign is clean and visible
• Tractor's lights are clean and functional
• Tractor Seat belt is in good condition
• Tractor ROPS is in good condition
• ROPS is in the raised position
• No tractor oil leaks
• Radiator free of debris
• Engine oil level and condition
• Engine coolant level and condition
• Power brake fluid level
• Power steering fluid level
• Fuel condition and level
• Sufficient lubrication at all lube points
• Air filter condition OPS-U-0030

6.2 Loader Pre-Operation Inspection and Service

Periodically inspect all moving parts for wear and replace when
necessary with authorized service parts. Look for loose fasteners, worn
or broken parts, and leaky or loose fittings. Make sure all pins have
cotter pins and washers. Serious injury may occur from not maintaining
this machine in good working order.
Avoid contact with hot surfaces including hydraulic oil tanks, pumps, motors, valves and
hose connections. Relieve hydraulic pressure before performing maintenance or repairs.
Use gloves and eye protection when servicing hot components. Contact with a hot surface
or fluid can cause serious injury from burns or scalding.
4211-4211SS 01/11
© 2011 Alamo Group Inc.
OPERATION
according to the
The following
Operation Section 4-12
(SG-21)
(SG-34)