Control Panel Description - Chauvet DJ 4BAR LT BT Quick Reference Manual

AC Power
This product has an auto-ranging power supply that works with an input voltage range of 100 to 240 VAC, 50/60 Hz.
To eliminate wear and improve its lifespan, during periods of non-use completely disconnect the
product from power via breaker or by unplugging it.
Power Linking
For the maximum number of 4BAR LT BT products that you can power link at each voltage, see the User Manual or the
sticker on the product.
Fuse Replacement
1. Disconnect the product from power.
2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3. Pry the safety cap out of the housing.
4. Remove the blown fuse from the clip on the front of the safety cap and replace with a fuse of the exact same
type and rating.
5. Re-insert the fuse holder and reconnect power.
Mounting
Before mounting this product, read the
Mounting Diagram
Safety Cable
(such as CH-05 from
Chauvet)
Hanging Bracket (x2)
Bracket Adjustment
Knob (x2)
Footswitch Operation
Pedal
activate, then tap
Left
to navigate to
desired function

Control Panel Description

Button Function
<MENU> Exits from the current menu or function
<UP> Navigates upwards through the menu list and increases the numeric value when in a function
<DOWN> Navigates downwards through the menu list and decreases the numeric value when in a function
<ENTER> Enables the currently displayed menu or sets the currently selected value into the selected function
4BAR LT BT QRG Rev. 2
QUICK REFERENCE GUIDE
Safety Notes.
Action Function
White
Red
Tap pedal to
Green
Blue
Yellow
Magenta
Cyan
Tripod Insertion Point
Pedal
Left (cont.)
Right
Both
Mounting Clamp (x2)
(such as CLP-15 from
Chauvet)
Clamp Hanging
Bolt (x2)
Pod Pan Adjustment
Knob (x4)
Pod Tilt Adjustment
Knob (x2 per pod)
Action Function
Auto snap program
Tap to navigate
(cont.)
Auto fade program
Press and hold Auto fade program
Tap Blackout
Press and hold Fade out or in
Tap Sound-active mode
Press and hold Strobe
EN
2