Table of Contents
Advertisement
2
WARNING
• Turn power off at the circuit breaker before installing the sensor
• Sensor must be installed and used in accordance with appropriate electrical codes
and regulations
• Installation by a qualified electrician is recommended
Package Contents
• HBS 200 or HBS 300
• HBS-DC
• Two 1/2" KO locknuts
• Installation instructions
• HBS-DC Radio Module
Installation Overview
Needed for installation
• Wire nuts for termination
Applications
• HBS 300 with installed HBS-DC: Open
areas where 360 degree coverage and
wireless control is desired, such as
in warehouses, distribution centers,
gymnasiums
• HBS 200 with installed HBS-DC: High
bay aisle ways where aisle coverage
and wireless control is desired
www.autani.com
Intended uses
• For indoor use only
• For individual fixture lighting control
with grouping (zone control) capability
Autani HBS-DC Wireless System
Autani wireless lighting control devices work
together to create groups (or control zones)
without the need for additional wiring.
The devices are RF based, operating at a
frequency of 2.4 GHz.
Autani HBS-DC
Wireless System Specifications
Communication
2.4 GHz
Frequency
Transmission Range
600 ft (182.8 m) depending on line of sight. Range may be less
if signal needs to pass through obstacles.
www.autani.com
3
Advertisement
Table of Contents
