Table of Contents
Advertisement
Seam pattern examples for the four-hole button
11
Seam pattern input for six-hole buttons
.01.04
● Switch on the machine.
● Select the program number and button type, see Chapter 9.03 Selecting the button
type and program number.
● Call up the programming mode
● Select the desired parameter (P01, P02 etc.) with the left +/- keys.
● With the two corresponding +/- keys move to or select the desired positions (X and Y)
or values.
Seam patterns with intermediate cutting (P06 = II),
without seam cycle (P09 = 1).
Seam patterns witouth intermediate cutting (P06 = I),
and without seam cycle (P09 = 1).
Seam patterns with seam cycle (P09 = 2),
the intermediate cutting function is switched off automatically.
Seam pattern "arrow" (PO9 = 3)
the intermediate cutting function is switched off automatically.
Stitch formation "Z" (P09 = 4)
the intermediate trimming function is switched off automati-
cally.
No
X
P 0 1
- 1 0
Y
2 0
Input
43
Advertisement
Table of Contents
