Table of Contents
Advertisement
Input
11
Sequence input
.02
In one sequence up to 99 seam patterns can be stored in any order. When working with
the sequence (sequence mode) the seam patterns are processed one after the other in
the order specified. After the last seam pattern in the sequence, the first seam pattern is
repeated again. Below is a description of a sequence input with two seam patterns.
●
●
●
●
●
●
●
●
●
●
46
Switch on the machine.
Call up the input mode (LED in the key lights up).
No
1 0 0
Select the function group "100" by pressing the left +/- keys.
Confirm the selection by pressing "+" on the right +/- keys.
No
1 1 3
Select parameter "113" by pressing the left +/- keys.
Confirm the selection by pressing "+" on the right +/- keys.
S EQ 1
1
Select the required seam pattern by pressing the middle +/- keys.
Select the next position by pressing "+" on the left +/- keys.
Select the next seam pattern by pressing the middle +/- keys.
After entering the seam patterns, conclude the sequence input by pressing the right +/-
keys ("EXIT").
S EQ
1
1 E X I T
Advertisement
Table of Contents
