Table of Contents
Advertisement
Sewing
The machine has a missed stitch sensor and a button loading control unit, with the aid of
which the sewing process can be monitored. If a fault occurs, key 1 lights up. The machine
start is blocked. Following steps must be carried out:
●
●
●
●
●
38
1
Fig. 10 - 02
Remove the workpiece.
Press key 1 (lamp goes off).
Cut off the button.
Feed a button (using the "F1" key or pedal position "-1")
Reinsert the workpiece and restart the sewing process.
The error signal may be caused by e.g. no button being fed (error 28) or by a
button inserted at the wrong angle (error 4). If key 1 lights up again and again,
have specialists check the machine adjustment.
Advertisement
Table of Contents
