Table of Contents
Advertisement
Mounting and commissioning the machine
8
Altering parameter "204"
.04.02
●
●
●
●
●
●
●
●
28
Switch on the machine.
Press the "TE" key to select the input mode (LED in the key is on).
No
2 0 0
Select the function group "200" by pressing the left +/- keys.
Confirm the selection by pressing the right plus key.
If necessary enter the access code, see Chapter 13.48.02 Entering/altering the access
code.
No
2 0 4
Select parameter "204" by pressing the left +/- keys.
Select the value calculated for the seam pattern size by pressing the right +/- keys, see
Chapter 8.04.01 Calculating the value for parameter "204".
By selecting the sewing mode, the altered value is taken over and the machine changes
to the sewing mode (LED in the key goes off).
VA L
1
Advertisement
Table of Contents
