Description Of The Error Messages - Pfaff 3307-1 Instruction Manual

Adjustment
13

Description of the error messages

.49
118
Display Description
Error 1 System error
Error 2 Sewing motor ERROR 2/BB/xxx
BB = 30: Timeout
xxx = Error in sewing motor control unit,
Error 3 Input insert plate at front (E6 –X5:14)
Error 4 Missed stitch detection with number of missed stitch
0: Error during initialisation of missed stitch detection
Error 5 Input Clamp lowered (E4 –X5:4)
"Switch clamp" locked, as main drive not in raised position.
Error 6 Time monitoring while running through sewing program
Stepping motor motion:
Error 7 - 1 Delay X not ready
Error 7 - 2
Delay Y not ready
Error 7 - 3 Delays X and Y not ready
Error 7 - 4 Ramp X not ready
Error 7 - 5 Ramp Y not ready
Error 8 Stitch length
Error 9 Sewing figure outside area
Error when moving to home position
Error 10 - 1 Outputs not ready
Error 10 - 2 Raise clamp
Error 10 - 3 Insert position not reached
Error 10 - 4 Blind stitching and input "blind stitching on" = 0
Error 10 - 5 No blind stitching and input "blind stitching on" = 1 or
Error 10 - 6
Pedal operated
Error 10 - 7 X-centre not reached
Error 10 - 8 X-centre not left
Error 10 - 9 Y-centre not reached
Error 10 - 10 Y-centre not left
Error 10 - 11 Time monitoring home test
Error 10 - 12 Absolute position – 0.3 not reached home test
Error 10 - 13 Absolute position + 0.6 not reached home test
Error 10 - 14 Needle raised position not reached
Error 11 Stepping motor step frequency too high
Error 12 Error in sewing program
20: Dead man
10: Speed
0B: StopX
0A: Reset stitch counter
09: Write parameter
05: Positioning sewing head shortest route
03: Positioning sewing head in reverse
02: Positioning sewing head forwards
see Chapter 13.50 Sewing motor errors
input "insert plate at front" = 1