Table of Contents
Advertisement
The Radiodetection DrillTrack
Drilling (HDD) machines.
The system comprises of a DrillTrack
more DataSondes.
Receiver
The DrillTrack
Receiver has been developed with the needs of the operator as the main priority.
Providing essential information automatically makes the equipment very easy to use and allows the operator to
work with confidence.
Once drilling has started the operation is fully automatic and the large LCD shows the operator information
about the drillhead.
The Receiver LCD provides automatic walkover positioning of the drillhead.
Four arrows automatically direct the operator left/right and forward/backward.
When all four arrows are displayed the depth automatically appears on the screen and can be stored in the
integral Borelog.
The display also provides the operator with a Drill Heading (compass), Tilt angle (Inclination), Roll Position
(clock) and in the Manual Mode a Signal Strength reading (if selected in the user Setup).
Feature highlights include:
Integral Borelogger
-
-
Automatic tracking arrows that indicate Go... Left/Right/Forward/Backward.
-
Drill head direction compass indicator.
-
Interference rejection technology.
Filtered rejection of standard line locator frequencies.
-
-
DataSonde frequency scanner
-
No mis-locates due to 'ghost signals'.
-
No confusion caused by +/- locates.
-
Down hole frequency change to overcome localised interference.
-
Tilt angle compensated locate position and depth measurements.
-
Automatic Depth readout.
-
Metric or Imperial readout selection.
-
Continuous display of Tilt angle and Roll position.
Tilt angle in % of Grade or degrees.
-
-
Display Backlight.
-
Comfortable working height to minimize fatigue.
1-1
DrillTrack
System Overview
system is designed to provide guidance information for Horizontal Direction
Receiver, a DrillTrack
DataView , a DrillTrack
Tripod and one or
Advertisement
Table of Contents
