Radiodetection DRILLTRACK G2 User Manual page 17

DrillTrack Operating Instructions
Receiver Operation
Locate the Drillhead/DataSonde housing by moving the Receiver in the direction indicated by the four arrows
on the LCD. When all four arrows appear on the screen, you are directly above the Drillhead/DataSonde
housing and the depth will be displayed automatically.
To toggle between the "Two Arrows Steering" screen and the "Four Arrows Locate" screen, press the Manual
key.
Moving forward, away from the Drillhead/DataSonde housing, the screen will automatically change from the
"Four Arrows Locate" to the "Two Arrows Steering" screen.
When behind the Drillhead/DataSonde housing and moving forward towards the Drillhead/DataSonde housing,
the screen will automatically change from the "Two Arrows Steering" screen to the "Four Arrows Locate"
screen.
3-5