Vdsl Connections - NetComm NL1901ACV Quick Start Manual

SETTING UP YOUR
GATEWAY

VDSL Connections

1. Connect the supplied RJ11 cable to the "modem" port of your DSL line filter and then connect the other end to
the DSL port on the back of the NL1901ACV. Connect the DSL line filter (not included) to the wall socket.
2. Connect the supplied RJ45 Ethernet cable from one of the yellow
NL1901ACV to your computer.
3. If you intend to use a cellular connection as a backup, insert a
in the diagram on the next page, then attach the
on the antenna sockets, as shown in the diagram on the next page.
4. Connect the included power adapter to the
wall socket. Press the
NL1901ACV has finished booting up, the Power light turns green.
6
Power
ON/OFF button to power the router on. The Power light illuminates in red. When the
Ethernet
SIM card (in 2FF format) in the direction shown
4G/LTE antennas by turning them in a clockwise direction
jack of the NL1901ACV and then plug it into an available
ports (1-4) on the back of the