Advertisement
Available languages
Available languages
Care and Cleaning
• Disconnect power to the ice maker before cleaning.
Condenser
For best performance, brush or vacuum lint and dirt
from the condenser at least once a year. Unscrew the
grille on the bottom front of the cabinet to access the
condenser.
Ice Maker Cleaning Chart
EXTERIOR
Painted metal surfaces:
Cabinet, doors
Stainless steel doors
(certain models)
INTERIOR
Door gasket
Interior and door liner
* Brand names are the trademarks of the respective manufacturer.
12
CAUTION
Detergent and water
Mild liquid sprays
Light cleaning: mild
detergent and water
Moderate soil: Bon Ami*
Discoloration: Cameo
Stainless Steel Cleaner*
Baking soda and water
Detergent and water
Detergent and water
Baking soda and water
, cont.
Dry with a clean, soft cloth.
DO NOT wipe the ice maker with a soiled
dishwashing cloth or wet towel. These may leave
residue that can scratch and weaken the paint. Do
not use scouring pads, powdered cleansers, bleach
or cleaners containing bleach. These products can
scratch and erode the paint finish.
DO NOT wax plastic or vinyl parts.
Use a soft cloth or sponge.
Always wipe with the grain of the stainless steel.
DO NOT use chlorine bleach or any cleaning product
that contains chlorine bleach.
After cleaning, rinse and dry.
To restore luster and remove streaks follow with
Stainless Steel Magic Spray* (Jenn-Air model A912,
Part No. 20000008).
Use 1–2 tablespoons baking soda per quart of
water. Be sure to wring out excess water from
sponge or cloth when cleaning around controls,
lights or electrical parts.
See above for baking soda solution.
DO NOT use abrasive cleaners, concentrated
detergents, bleaches, cleaning waxes, solvents or
polish cleaners to clean the ice maker interior.
Advertisement
Chapters
