Huawei SUN2000 User Manual page 35

SUN2000-(3.8KTL-11.4KTL)-USL0
User Manual
Procedure
Step 1 Determine the positions for drilling holes using the marking-off template. Level the positions
of mounting holes using a level, and mark the positions with a marker.
Figure 4-9 Determining hole positions
(1) Bottom alignment line for the mounting bracket (top)
Step 2 Drill holes using a hammer drill.
Issue 01 (2018-05-21)
You are advised to apply anti-rust paint on to the hole positions for protection.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 System Installation
28