Huawei SUN2000 User Manual page 137

SUN2000-(3.8KTL-11.4KTL)-USL0
User Manual
Table 7-18 Description of the parameters on the Inverter connected router settings screen
Parameter
To wireless router
Network
Password
Encrypted with
DHCP
IP address
Subnet mask
Gateway
Issue 01 (2018-05-21)
Description
Enables or disables
connection between the
SUN2000 and a router.
Specifies the SSID of the
router to which the inverter
WiFi network connects.
Specifies the WiFi password
for the router.
Specifies the encryption
level for the SUN2000 to
connect to the router over
WiFi. It should be the same
as the encryption level of
the router.
This parameter is associated
with the network name.
 If the IP address
automatically assigned
by the home router is
used, enable this
parameter. Then the
following parameters
will be automatically
assigned.
 If the IP address
automatically assigned
by the home router is not
used, disable this
parameter. Then the
following parameters
need to be manually
assigned.
Specifies the IP address of
the router to which the
inverter WiFi network
connects. Recommended:
Set the IP address in the
same network segment as
the home router IP address.
Specifies the router subnet
mask.
Specifies the router gateway
address.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 Operations on the Local FusionHome App
Value Range

Disable

Enable
N/A
N/A
 Not encrypted
 WEP_OPEN

WEP_SHARED

WPA
 WPA2

Disable

Enable
[1.0.0.0, 223.255.255.255]
N/A
N/A
130