Huawei SUN2000 User Manual page 114

SUN2000-(3.8KTL-11.4KTL)-USL0
User Manual
Parameter
Comm interruption duration
(min)
Soft start time (s)
AFCI
AFCI detection adaptive
mode
OFF due to abnormal
grounding
Emergency stop switch DI
Issue 01 (2018-05-21)
Description
Specifies the duration for
determining communication
interruption. Used for
automatic shutdown for
protection in case of
communication interruption.
Specifies the duration for
the power to gradually
increase when the SUN2000
starts.
The North American
standard requires the
SUN2000 to provide the DC
arc detection function.
Adjusts the sensitivity of arc
detection.
This function is used to
detect whether the
SUN2000 is properly
grounded before starting the
SUN2000, or to detect
whether the ground cable is
disconnected when the
SUN2000 is working. This
parameter is set to Enable
by default. For certain types
of power grids, if an
isolation transformer
connects to the output side
of the SUN2000, you need
to set OFF due to
abnormal grounding to
Disable after checking that
the SUN2000 is properly
grounded. Then the
SUN2000 can start
normally.
If you are not sure whether
the SUN2000 connects to
such a power grid, check
with your supplier or
Huawei technical support.
Specifies the I/O signal of
the emergency stop switch.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 Operations on the Local FusionHome App
Value Range
[1, 120]
[20, 1800]
 Disable
 Enable

High

Moderate

Low

Disable

Enable
 Disable
 NC
 NO
107