Huawei SUN2000 User Manual page 127

SUN2000-(3.8KTL-11.4KTL)-USL0
User Manual
Parameter
Port number
Remote protocol type
Encrypted transmission
Encrypted certificate mgmt
SN
Registration code
Issue 01 (2018-05-21)
Description
Specifies the number of the
port on the management
system to which the
SUN2000 connects over a
network protocol. Set this
parameter according to the
requirements of the
connected management
system.
Specifies remote protocol
type, which the SUN2000
connect to the management
system.
If this parameter is enabled,
data is transmitted between
the SUN2000 and the
management system after
being encrypted with SSL.
If this parameter is disabled,
data is transmitted between
the SUN2000 and the
management system as
plaintext, which poses
security risks.
If encrypted connection to a
third-party network
management system (NMS)
is required, replace the
client certificate with the
certificate provided by the
third party. You can select
the appropriate root
certificate, customer
certificate, or key file and
enter the private key
password. After the
replacement is complete,
connect the SUN2000 to the
management system and
check the correctness of the
certificate.
SUN2000 equipment SN.
The installer registration
code is generated by the
SUN2000 automatically and
is used for the installer to
register with the
management system and
manage the inverter.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 Operations on the Local FusionHome App
Value Range
[0, 65535]
 Invalid protocol type
 MODBUS RTU

Sunspec
 Disable
 Enable
N/A
N/A
N/A
120