Annex Four: Specification Of Analyzing System For Wind-Speed Gathering - Yangzhou Shenzhou Wind-driven Generator FD2.1-200-8L User Manual

Annex Four: Specification of Analyzing System for Wind-speed Gathering (FS02)
The system of measuring wind consists of wind-speed sensor (FS10), dogvane (FS20), data
collector (FS200) and matched cable. Usually, data collector (FS200) can display the information of
wind speed, wind direction and set the parameter. Meanwhile, following is going to show you the
procedure of connecting the wind-measuring system and computer.
FS200 is served as measuring and recording wind speed and wind direction (ready for use). It
has capacity of cycle record of 8000 history record. Targeted-design nixie tube, liquid crystal
screen and keyboard contribute to the easy and convenient operation of FS200. It can also
communicate with computer, that is, to record the data of wind speed and wind direction to
computer, which will be observed and analyzed by FS200.
Feature:
1. Running mode of low power consumption: FS200 will automatically turn off the nixie tube and
the liquid crystal screen, so it can run in mode of low power consumption.
2. Wind cup of the dogvane sensor is made of carbon fiber, which enhances strength and
contributes to start the equipment.
Technical index
Measuring range ： Wind speed: 0 ～ 60m/s
Accuracy:
Power supply:
Recording interval:
Communicating joint:
Operating environment temperature: -40 ℃～ 50 ℃
± 0.3m/s
AC 220V ± 20% 50HZ ， DC12V 、 5V are for choice.
1min to 60mins
RS-232
Wind direction: 0 ～ 360 °
± 3 °
27