Yangzhou Shenzhou Wind-driven Generator FD2.1-200-8L User Manual page 24

Specification of each part
1) Anemoscope board
2 ） Liquid crystal: turn-on, the background light is on. (It will shut down automatically after 5
second if there is no operation.) Wind speed figure is displayed, such as 8.4m/s. and wind scale,
such as 5.
3 ） Operation indicting light: The green light is on if it is under normal operation.
4 ） Under wind speed(Wmin) indicating light: When the wind speed is under W ≤ Wmin state, there
will be alarming. Press any key will make the alarming sound nonexistent.
5 ） Over wind speed (Wmax) indicating light: When the wind speed is under W ≥ Wmax state, there
will be alarming. Press any key will make the alarming sound nonexistent.
6 ） Function key: after pressing this key, you will enter into the menu of setting parameter; at this
time, the cursor will shine on the first figure.
7 ） Figure key: Under the state of setting parameter menu, press this key, the figure where the
cursor shines will be increased by one; press this key continuing, requisite figure can be set.
8 ） Shift key: Under the state of setting parameter menu, press this key, the cursor will be switch
风 速 仪
Wind Speed :
08.4m/s 5 level
工作 过风速 欠风速
功能 数字
Diagram 12
1
2
3
4
5
移位
24