Settings / Test Programs And Information - Ivoclar Vivadent Programat CS4 Operating Instructions Manual

5.6 Settings / test programs and information

By pressing the Settings key (78) you will reach the setting screen
(the latest setting selected will be shown).
5.6.1 Settings / test programs
Settings
Contrast
Temperature unit
Language selection
Temperature
calibration UTH
Temperature
calibration MTH
Volume
Melody
Programming
20
The cursor keys (79, 80) can be
used to toggle between the
possible settings. This screen can
be left with the ESC key (71) or
one of the program keys (82,
83, ...).
Display Short Description
The contrast can be
adjusted with the -/+
keys.
The -/+ keys are used
to toggle between °C
and °F.
Enables the language
selection.
With this program,
the temperature
calibration program
for the crystallization
temperature range
can be started.
See Chapter 7.6
Temperature Calibra-
tion for more details.
With this program,
the temperature
calibration program
for the sintering tem-
perature range can
be started. See Chap-
ter 7.6 Temperature
Calibration for more
details.
The desired volume
can be set using the
-/+ keys
The desired melody
may be set using the
-/+ keys
Enables the
programming of the
parameters for the
currently selected
program *
Settings Display
Renaming
Time
Date
General write
protection
Heater test program
Keypad test
Cleaning program
Protocol
Start delay
Optical Status Display
Service reminder
Short Description
Enables the renaming
of the currently
selected program *
Enables the renaming
of the material *
The time can be set
using the -/+ keys
The date can be set
using the -/+ keys
Enables the activation
or deactivation of the
general write
protection by means
of the -/+ keys after
entering the user
code. The write
protection covers all
programs
Enables a check of
the heating system
Enables a check of
the membrane-sealed
keypad
With this program,
the heating elements,
including the
insulation materials,
can be cleaned by
means of a heat
process
Enables the creation
of protocols of
programs
Activating this
function enables the
delayed start of
programs
With this menu item,
the Operating Status
Display can be
activated/deactivated
Turn service reminder
off or set new
reminder
in 12 months