Table of Contents
Related Manuals for sauter TI-A0
Summary of Contents for sauter TI-A0
- Page 1 Sauter GmbH Ziegelei 1 Tel: +49-[0]7433- 9933-199 D-72336 Balingen Fax: +49-[0]7433-9933-149 E-Mail: info@sauter.eu Internet: www.sauter.eu Instruction Manual Test Stand For analogue Shore Hardness Tester SAUTER TI Version 1.2 01/2018 TI -BA-e-1812...
- Page 2 Instruction Manual Test Stand for analogue Shore Hardness Tester Thank you for buying a SAUTER Test Stand for analogue Shore Hardness Testers. We hope you are pleased with your high quality test stand in table version and with its functional range. If you have any queries, wishes or helpful suggestions, do not hesitate to call our service number.
- Page 3 This Test Stand was specially designed for our analogue Shore hardness testers. Combined with this, tests can be performed more stable and accurate, up to 25 %. TI-A0 is applied for HB instruments Shore A and 0; TI-D is applied for HB instruments Shore D.
- Page 4 4 Annotation 1. This test stand can only be applied for Shore durometers. If it is installed with dif- ferent durometers, the quality of weight first has to be adjusted according to the re- quirements. GB/T531.1-2008 has a rule for the adjustment of total quality as shown below: Note: Total quality includes quality of lock screws, designation weight, screw, installa- tion pole and durometer.
Need help?
Do you have a question about the TI-A0 and is the answer not in the manual?
Questions and answers