Table of Contents
Advertisement
Insert 3/8" (9.5 mm) diameter rebar (not provided) into the holes located at the bottom of each leg
9.
making sure that the rebar will be a minimum of three inches (3") below the deck surface.
Bond slide per local codes (see ELECTRICAL BONDING page 16).
10.
Secure the ladder so that the ladder steps are level, from side to side, and the ladder is held at
11.
15 degrees (0.26 radians) from vertical.
Secure the slide to prevent the movement during the concrete pour to ensure that the slide
12.
position remains the same.
SUGGESTION: To ensure easy removal of concrete from legs and ladder, wax or wrap with wax
13.
paper approximately 12 inches (0.305 M) above deck level.
Proceed with pouring the concrete deck and finish as desired. Let concrete cure per concrete
14.
manufactures directions before using slide.
IN-DECK MOUNTING INSTRUCTIONS
16
Hide quick links:
Advertisement
Table of Contents
