Epson TM-i Series Easy Setup Manual page 37

Printing result when an error
Process
Applying New Invalid%Key%
settings
<Example>
InvalidIPAddress
DeviceNotFound
DeviceNotWireless
Web content WebContents not found.
deployment
Failed to extract the Web
Contents.
Not enough space to extract the
Web Contents
microSD Card is not found
occurs
The format for the %Key% key in the setting.ini
file is not correct. 
Check and correct the key for the setting.ini
file.
Could not find the TM printer designated by
the MACAddress key in the [NetworkPrinter-
%X%] section.
Connect the applicable TM printer, and
confirm that the power is on.
Although wireless LAN settings are designated
in the [NetworkPrinter-%X%] section, the
printer detected at the MACAddress of the
same section is a wired LAN printer. 
Delete the wireless LAN settings for the
applicable printer.
Or, if setting a wireless LAN TM printer,
connect it with a USB cable.
Could not find the designated web content
file.
Check and correct the content of the
AppliedLocalFile key in the [WebContents]
section.
The designated web content file is incorrect.
Check and correct the content of the file
designated by the AppliedLocalFile key in the
[WebContents] section.
The size of the designated web contents file
exceeds 30MB.
Check if the file size designated by the
AppliedLocalFile key in the [WebContents]
section is 30MB or less and correct the error.
[WebContentsStorage] section
Although "microSD" is designated as the value
for the WebContentsStorage key, there is no
microSD card inserted in the TM-i.
Check if a microSD card is inserted in the TM-i.
Chapter 3 Easy Setup for the TM-i
Solution
3
37