Epson TM-i Series Easy Setup Manual page 22

Section name
StatusNotification
22
Parameter
Do not delete items where settings are not required.
Use Designates whether to enable / disable the Status
notification function.
"Enable" / "Disable"
ID Designates the ID used when notifying the server of the
status.
 This must be set if the value for "Use" is "Enable".
Within 30 alphanumeric characters (only underscores,
periods, and hyphens)
Null characters can also be designated.
Password Designates the password used when notifying the server of
the status.
 This must be set if the value for "Use" is "Enable".
Within 30 alphanumeric characters (only underscores,
periods, and hyphens)
Null characters can also be designated.
URL Designates the URL to send the status notification to.
 This must be set if the value for "Use" is "Enable".
Within 255 alphanumeric characters.
 The protocol is in http or https format.
Interval Designates the wait period from when a status is notified to
the next notification operation.
 This must be set if the value for "Use" is "Enable".
Integer from 1 to 86,400.
Description
Valid value