Epson TM-i Series Easy Setup Manual page 26

Section name
NetworkPrinter-%X%
26
Parameter
SubnetMask Designates the subnet mask.
 If the value for "IPAddressSettingMethod" is "Manual", this
must be set.
 If the value for "IPAddressSettingMethod" is "Auto", this is
ignored.
 Format of [numerical value 0 to 255].[numerical value 0 to
255].[numerical value 0 to 255].[numerical value 0 to 255]
 The following address(es) cannot be used.
0.0.0.0
127.0.0.1
255.255.255.255
255.0.255.0
Gateway Designates the default gateway.
 This is ignored if the value for IPAddressSettingMethod is
"Auto".
 Format of [numerical value 0 to 255].[numerical value 0 to
255].[numerical value 0 to 255].[numerical value 0 to 255]
 The following address(es) cannot be used.
127.0.0.1
NetworkMode Designates the operation mode for wireless LAN.
"Adhoc" / "Infrastructure"
SSID Designates the SSID.
1 to 32 alphanumeric characters and symbols (excluding
spaces)
AdhocChannel Designates the adhoc channel used when the wireless LAN
operation mode is "Adhoc".
If "Infrastructure" is used for the wireless LAN operation mode
designates "1".
"1" to "11"
Communication- Designates the communication standard for wireless LAN.
Standard
"802.11b" / "802.11b/g/n" / "802.11b/g/n"
Authentication- Designates the authentication method.
 If the value for "NetworkMode" is "Adhoc", designate
Method
"OpenSystem" or "SharedKey".
 If the value for "NetworkMode" is "Infrastructure", desig-
nate "OpenSystem", "SharedKey", or "WPAPSK".
(Designates "WPAPSK" when using WPA2PSK.)
"OpenSystem" / "SharedKey" / "WPAPSK"
Description
Valid value