Table of Contents
Advertisement
[NetworkPrinter-2]
MACAddress="12:34:56:78:90:CD"
HostName=""
IPAddressSettingMethod="Manual"
APIPA="Disable"
IPAddress="170.150.1.4"
SubnetMask="255.255.255.0"
Gateway=""
NetworkMode="Infrastructure"
SSID="SSID.ueda"
AdhocChannel="1"
CommunicationStandard="802.11b"
AuthenticationMethod="WPAPSK"
EncryptionMethod="AES"
DefaultWEPKey="WEPKey1"
WEPKey1=""
WEPKey2=""
WEPKey3=""
WEPKey4=""
PresharedKey="epson1234"
Password=""
[EasyKitting]
Once="False"
The setting.ini file is written as follows. Edit the contents to match your settings.
Section name
Parameter
General
Administrator
Location
WiredLinkLayer
LinkSpeed
Settings for printers that can be controlled
by TM-i
Easy Setup settings
Description
Valid value
Designates the administrator name displayed on the EPSON
TMNet WebConfig [Admin information] page.
Within 255 alphanumeric characters.
Designates the installation location displayed on the EPSON
TMNet WebConfig [Admin information] page.
Within 255 alphanumeric characters.
Delete this item if you are not using wired LAN.
Designates th e link s peed for wire d LAN. Nor mally
AutoNegotiation is specified.
"10BaseTHalf"/"10BaseTFull"/"100BaseTHalf"/"100BaseTFull"/
"AutoNegotiation"
Chapter 2 Preparing the setting file
2
15
Advertisement
Table of Contents
