Epson TM-i Series Easy Setup Manual page 17

Section name Parameter
WiredNetwork
DNSServerAddres
s1~3
WirelessLinkLayer
NetworkMode
SSID
AdhocChannel
Communication-
Standard
AuthenticationM
ethod
Description
Valid value
Designates the IP addresses for the DNS servers.
"1~3" indicates the order of use for the DNS servers. They are
used in ascending order, starting with 1.
 If the value for "DNSServerSettingMethod" is "Manual",
"DNSServerAddress1~3" must be designated.
 This is ignored if the value for "DNSServerSettingMethod" is
"Auto".
 Format of [numerical value 1 to 255].[numerical value 0 to
255].[numerical value 0 to 255].[numerical value 0 to 254]
 The following address(es) cannot be used.
127.0.0.1
224.0.0.0 to 239.255.255.255
240.0.0.0 to 255.255.255.255
 If nothing is entered, "0" can be used.
Do not delete items where settings are not required.
Designates the operation mode for wireless LAN.
"Adhoc" / "Infrastructure"
Designates the SSID.
Between 1 and 32 alphanumeric characters and symbols
(excluding spaces)
Designates the adhoc channel used when the wireless LAN
operation mode is "Adhoc".
 If "Infrastructure" is used for the wireless LAN operation
mode designates "1".
"1" to "11"
Designates a communication standard for wireless LAN.
"802.11b/g" / "802.11b/g/n"
Designates the authentication method.
 If the value for "NetworkMode" is "Adhoc", designate
"OpenSystem" or "SharedKey".
 If the value for "NetworkMode" is "Infrastructure",
designate "OpenSystem", "SharedKey", "WPAPSK", or
"WPA2PSK".
"OpenSystem" / "SharedKey" / "WPAPSK" / "WPA2PSK"
Chapter 2 Preparing the setting file
2
17