Epson TM-i Series Easy Setup Manual page 27

Section name Parameter
NetworkPrinter-%X%
Encryption-
Method
DefaultWEPKey
WEPKey1 to 4
PresharedKey
EasyKitting Once
Description
Valid value
Designates the encryption method.
 If the value for "Authentication Method" is "OpenSystem",
designate "None" or "WEP".
 If the value for "Authentication Method" is "SharedKey",
designate "WEP".
 If the value for "Authentication Method" is "WPAPSK", des-
ignate "TKIP" or "AES".
"None" / "WEP" / "TKIP" / "AES"
Designates the WEP key in use (1 to 4).
"WEPKey1" / "WEPKey2" / "WEPKey3" / "WEPKey4"
Designates the WEP key that corresponds to the WEP key
number.
 For the pass phrase, designates 5 or 13 alphanumeric
characters and symbols (excluding spaces) .
 For hexadecimals, use either 10 or 26 alphanumeric char-
acters (0 to 9, a to f, A to F).
Designates the pre-shared key used when using WPAPSK or
WPA2PSK.
 For the pass phrase, designate between 8 and 63 alpha-
numeric characters and symbols (excluding spaces).
Designates whether to rename the setting.ini file to
setting.ini.done after Easy Setup is complete. 
If "True" is designated, the setting.ini file is renamed to
setting.ini.done. This prevents a setting.ini file that has
completed Easy Setup from being used in Easy Setup again.
 "True": After Easy Setup is complete, the setting.ini file is
renamed to setting.ini.done.
 "False": After Easy Setup is complete, the setting.ini file is
not renamed to setting.ini.done.
Chapter 2 Preparing the setting file
2
27