Epson TM-i Series Easy Setup Manual page 18

Section name
WirelessLinkLayer
WirelessNetwork
18
Parameter
EncryptionMetho Designates the encryption method.
 If the value for "Authentication Method" is "OpenSystem",
d
designate "None" or "WEP".
 If the value for "Authentication Method" is "SharedKey",
designate "WEP".
 If the value for "Authentication Method" is "WPAPSK", des-
ignate "TKIP" or "AES".
 If the value for "Authentication Method" is "WPA2PSK",
designate "AES".
"None" / "WEP" / "TKIP" / "AES"
DefaultWEPKey Designates the WEP key in use (1 to 4).
"WEPKey1" / "WEPKey2" / "WEPKey3" / "WEPKey4"
WEPKey1 to 4 Designates the WEP key that corresponds to the WEP key
number.
 For the pass phrase, use either 5 or 13 alphanumeric char-
acters and symbols (excluding spaces).
 For hexadecimals, use either 10 or 26 alphanumeric char-
acters (0 to 9, a to f, A to F).
PresharedKey Designates the pre-shared key used when using WPAPSK or
WPA2PSK.
 For the pass phrase, use between 8 and 63 alphanumeric
characters and symbols (excluding spaces).
 For hexadecimals, use 64 alphanumeric characters (0 to
9, a to f, A to F).
Do not delete items where settings are not required.
IPAddressSetting Designates the method for setting the IP address.
Method
"Auto" / "Manual"
APIPA Designates whether to enable / disable the APIPA.
"Enable" / "Disable"
IPAddress Designates the IP address.
 This must be set if the value for IPAddressSettingMethod is
"Manual".
 This is ignored if the value for IPAddressSettingMethod is
"Auto".
 Format of [numerical value 1 to 255].[numerical value 0 to
255].[numerical value 0 to 255].[numerical value 0 to 254]
 The following address(es) cannot be used.
127.0.0.1
224.0.0.0 to 239.255.255.255
240.0.0.0 to 255.255.255.255
Description
Valid value