RAIS Q-Tee series User Manual page 87

English
The stove is lifted up on the wall bracket and
pushed against the wall until it falls in the
"notch" (8).
Examine that the top plate of the stove is
leveled. If necessary, lift the stove from the
wall and adjust the wall bracket.
M4 thread for set screws
The bottom wall bracket (5) is mounted beneath the
stove with 2 M6 screws (6). The middle screw (6)
adjusts the stove vertically.
The bracket can be fastened to the wall if desired,
however, the screws are not to be tightened because
of the downward expansion of the stoves during
heating.
6
Finally 2 M4 screws (7) are screwed on each side of
the bracket and locks the stove to the bracket.
See the top of the page.
RAIS - Manual for RAIS Q-Tee
5
8
5
7
19