Charging System And Rectifier Diode Test - Launch BST-460 User Manual

LAUNCH
BST-460 Battery System Tester User Manual
NOTE: While the system prompts you to start engine, pressing
RETURN key can not exit the current interface.
Follow the on-screen instructions to start the engine, the tester will
automatically complete the cranking test and display the result.
Generally, cranking voltage lower than 9.6V is regarded as abnormal
and it is OK if it is higher than 9.6V.
Test result of the tester inclu des actual cranking voltage, cranking
amps, and actual cranking time.
When cranking test is abnormal, battery test result will be displayed.
See below picture:
It is convenient for maintenance personnel to quickly know the whole
state of the starting s ystem according to the data.
After testing finished, do not shut down the engine, press OK key to
enter Charging Test.

3.5 Charging System and Rectifier Diode Test

When enter the charging test, the tester will display "Charging Test?"
15